Western Digital WD1002-WA2 Controller
Default settings are in Bold or are selected by a 
.
E1-E6: Adapter Address
E7/E8: Undocumented/Reserved: (Must be Jumpered.)
E9/E10: Grounding
E11/E12: Undocumented/Unknown: (Default is Open)
The WD1002-WA2 was the basis for the highly successful WD1003, and eventual WD1006 lines of ST506/412(MFM) controllers. It requires 3rd party software for Low
Level Formatting, since it lacks the routine in ROM. The optimum interleave was 3:1.
| 1002-WA2 |
Home | Comments |