J6(1/2),(3/4),(5/6): SCSI ID

J6(7/8): LED

JP2(1/2),(3/4) or J7(1/2),(3/4): Spindle Sync.

(1/2) & (3/4) Jumpered: Off Line.

(1/2) Jumpered: Master.

(3/4) Jumpered: Slave.

Both Open: (Not Specified).

JP2(5/6): Spin-Up Option

Jumpered: Spin-up at Power On.

Open: Spin-up on SCSI Command.

JP2(7/8): SCSI Parity

Jumpered: SCSI Bus PArity Checking Disabled.

Open: SCSI Bus Parity Checking Enabled.

(9/10),(11/12),(13/14),(15/16): Factory Installed (Do not remove)

J3(1/2),(3/4): Termination Power Source

(1/2) Jumpered: Term. Power supplied from the Drive.

(3/4) Jumpered: Term. Power supplied from the SCSI Bus.

J3(5/6): SCSI Bus Terminator

JP3(7/8): Sync. Spindle Terminator

Jumpered: Master Clock line is Terminated.

Open: Master Clock line is not Terminated.